your current page:home|productsproducts
name:tl-vacuum autoloader
model:tl-800gn2-p
- parameters
- characteristic
- introduction
| model | tl-800gn2-p | |
| motor | type | induction |
| specification |
1.1kw 3ø |
|
| conveying capacity（kg/hr） | 650 | |
| static wind pressure(max) | 1450 mmaq | |
| filter |
ø188* 115h |
|
| volume of material hopper（l） | 6.5 | |
| inside diameter of conveying pipe（mm） | ø38 | |
| external size（mm） | main body l w h | 680×370×500 |
| material hopper l w h | 430×440×700 | |
| weight（kg） | main body | 60 |
| material hopper | 12 | |
• the main engine and the material hopper are designed separately,and thus it is safe,easy and convenient to be opperated.
• the whole operation is controlled by microtrip computer.
• equipped with an independent filter,which is very convenient to clean up dust.
• the equipped muffler reduces the noise in operation.
• stainless steel material hopper is light in weight,durable and very convenient for cleaning the device.
• the control box,being designed separately,is easy to be well maintained.
• auto-buzzer will give alarm while lacking material.
• auto-protective device protects motor against overloading.
• the bunker with electronic eye can be installed on the charging inlet of molding machine directly.
• the air revolving dust arrester reduce the clean times of filter is suitable for the grinded material conveying.
• can select two-material proportional valve ,used for new material mixed grinded material using or instant receiving of grinded material.