your current page:home|productsproducts
name:bakelite injection moulding machine
model:she258b
- parameters
- characteristic
- introduction
| model | she258b | ||
| injection unit | a | b | |
| screw diameter | mm | 50 | 52 |
| shot size(ps) | cm³ | 610 | 660 |
| shot weight | g | 730 | 790 |
| injection pressure | mpa | 221 | 204 |
| injection rate | g/s | 171 | 185 |
| screw l/d ratio | l/d | 16 | 15.3 |
| screw speed | r.p.m | 0-180 | |
| nozzle diameter | srmm | 20 | |
| clamping unit | |||
| clamping tonnage | kn | 2580 | |
| toggle stroke | mm | 570 | |
| mould thickness | mm | 220-580 | |
| space between tie-bar | mm | 580x580 | |
| ejector stroke | mm | 160 | |
| ejector tonnage | kn | 70 | |
| ejector number | piece | 9 | |
| hole diameter | mm | 160 | |
| others | |||
| heater power | kw | 17 | |
| max. pump pressure | mpa | 16 | |
| pump motor power | kw | 25 | |
| machine dimension | m | 6.3x1.8x2.0 | |
| machine weight | t | 8 | |
| oil tank capacity | l | 350 | |
● specially designed screw & barrel for bakelite, which is made by high strength bi-metallic steel with special treatment, with the characteristic of good corrosion resistance & good abrasion resistance.
● oil cooling device in the bakelite screw & barrel ensures the precision of the temperature control.
● according to bakelite material features, the machine can exhaust while opening the mold.
● it can be converted into thermoplastic injection molding machine after replacing the screw and barrel group.
● upgraded size of the hydraulic motor improves the injection rate and achieves a better plasticization.
● specially designed heat resolution plate in the mould platens to meet the bakelite mold temperature requirements.
● two sets of mold temperature control interface, controlled by the plcwith high precision.
● using high-precision linear transducer to achieve high-precision position control. position setting precision can reach 0.1mm.
● automatic mold adjustment function can directly input locking pressure and automatically complete mold thickness adjusting by plc.
|
high-efficiency, energy-saving, environmental,low-noise, quick response pressure responses fast, quickly starts up to 0.05s. compared to traditional injection molding machine the control system to respond will be 2-3 times faster. high response speed, shorten cycle times, improve production effi ciency. products repeat accuracy can be increased to more than 5 thousandths, fully able to meet the requirements of ultra-precision injection molding.
|
|
comparison of power consumption
|
