your current page:home|productsproducts
name:h series nylon cable injection moulding machine
model:she528-h
- parameters
- characteristic
- introduction
| model | she528-h | ||
| injection unit | a | b | |
| screw diameter | mm | 60 | 65 |
| shot size(ps) | cm³ | 835 | 980 |
| shot weight | g | 750 | 880 |
| injection pressure | mpa | 258 | 220 |
| injection rate | g/s | 360 | 360 |
| screw l/d ratio | l/d | 22 | 22 |
| screw speed | r.p.m | 0-200 | |
| nozzle diameter | srmm | 15 | |
| clamping unit | |||
| clamping tonnage | kn | 5280 | |
| toggle stroke | mm | 90-650 | |
| mould thickness | mm | 200-800 | |
| space between tie-bar | mm | 720x720 | |
| ejector stroke | mm | 218 | |
| ejector tonnage | kn | 125 | |
| ejector number | piece | 13 | |
| hole diameter | mm | 110 | |
| others | |||
| heater power | kw | 27 | |
| max. pump pressure | mpa | 16 | |
| pump motor power | kw | 85 | |
| machine dimension | m | 9.1x2.1x2.4 | |
| machine weight | t | 24 | |
| oil tank capacity | l | 900 | |
●optimized toggle clamping design for the nylon cable mould, reduced opening stroke to shorten mould opening & clamping time.
●strengthened mould platen, frame, toggle, etc., make the whole machine more rigid and more durable with high clamping force.
●strengthened mould platen, frame, toggle, etc., make the whole machine more rigid and more durable with high clamping force.
●moog servo valve and upgraded hydraulic system ensures high injection speed and lower the production cycle.
|
high-efficiency, energy-saving, environmental,low-noise, quick response pressure responses fast, quickly starts up to 0.05s. compared to traditional injection molding machine the control system to respond will be 2-3 times faster. high response speed, shorten cycle times, improve production effi ciency. products repeat accuracy can be increased to more than 5 thousandths, fully able to meet the requirements of ultra-precision injection molding.
|
|
comparison of power consumption
|
